One of the worst problems associated with bathroom sinks is clogged drains. If left untreated, a clogged bathroom sink drain can lead to serious plumbing issues and even flooding. Many times, a bathroom sink drain can become completely clogged by hair, oils, or other particles that can become trapped. This can become a problem if you don’t know how to remove it. The best way to unclog a drain in your bathroom is to follow the basic guidelines for unclogging drains.
One of the simplest methods for unclogging a bathroom sink drain involves using a plunger or long handled pliers to force open the strainer assembly. Start by positioning the pliers inside the basin assembly and pushing outward until the seal between the strainer head and basin glass is released. Once this is achieved, move the pliers outward and toward the strainer arm to loosen the compression screw. If the screw is difficult to turn, you might need to use two or three fingers to hold the screw firm. Once the screw is loosened, remove the assembly from the basin.
Another common cause for clogs in bathroom sink drains is a build up of hair, oils, or other debris that can become caught in the trap. To clean the trap, first open the trap, and then gather up as much of the unwanted material as possible. In order to clean the trap, use a plastic scrubbing pad with an anti-bacterial liquid that is safe to use on any surface. The anti-bacterial liquid will likely to wash away any particles that are too small to be removed with your hands. Once the anti-bacterial liquid has completely dried the debris, use a rag or towels to remove the rest of the build up.
Now it is time to remove the clog using the steps above. However, if the clog is deeper or more stubborn, you may require a little more help. In this case, the bathroom sink drain stopper is most likely the tool you will need. Remove the stopper and place it in the basin to drain the accumulated water.
Next it is important to diagnose the source of the clog in your bathroom sink drains. Sometimes a bathroom overflow opening has become clogged and is blocking the flow of water through the pipes. You may notice that the water drains quickly down one side of the pipe and takes a long time to move the other way. In this case it is a mechanical problem. It could be that there is too much pressure building up in the pipe, or it could be that the pipe was improperly installed. In these cases the only way to repair the problem is to enlarge or repair the pipe.
If the clog in your bathroom sink drain seems to be coming from a drain trap, remove the trap and turn on the bathroom sink drain stopper to allow water to flow freely through the pipe. If the water flow is slow, it may be necessary to repair the trap or enlarge it. If the drain pop-up does not stop, try to reseal the overflow opening with perforated copper tape. This is the simplest and easiest type of repair and it will keep your sink and faucets working their best.
Finally, if the clog in your bathroom sink drain cannot be cleared by these simple fixes, the best solution is to contact a professional plumbing service. Your plumbing service expert can open your plumbing trap and remove the clog with the use of a special drain snake tool. The drain snake reaches into the pipe and removes the clog using powerful suction.
This is the best solution to a clogged bathroom sink drain, because it does not damage your faucets or plumbing fixtures. If you want to save money and install the bathroom sink drain fast, a plumber can help. In most cases, it’s a good idea to have your clogged bathroom sink drain replaced by a professional when you notice the first signs of a blocked drain. This will give you the peace of mind that your bathroom and faucets are in good working order. A bathroom that works is always a happy bathroom!